User`s guide

4. Lift up the scanner unit and check to see if the print head is in the far right position (the home
position). If not, turn on the product, wait for the print head to move, then turn the product off again.
5. Lower the scanner unit.
6. Unplug any connected cables.
7. Lower the control panel by squeezing the release bar and gently pushing the panel down.
Caution: Do not lower the control panel without first squeezing the release bar or you may damage
your product.
8. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product.
191