Epson Stylus CX4400 Series Epson Stylus CX4400 Series Parts Accessories Paper support Ink Cartridges Feeder guard Color Scanner lid Edge guide Part number Black 88 Cyan 88 Magenta 88 Yellow 88 Media Control panel buttons Output tray and extension Size Epson Ultra Premium Photo Paper Glossy Borderless 4 x 6 inches S041934 Letter (8.5 x 11 inches) S041935 Epson Bright White Paper Letter (8.
Epson Stylus CX4400 Series Envelopes Specifications Printing Printing method On-demand ink jet Size No. 10 (4.1 × 9.5 inches) Paper type Plain bond paper Weight 20 lb (75 g/m²) to 24 lb (90 g/m²) Nozzle configuration Black: 90 nozzles Color: 270 nozzles (90 each cartridge: cyan, magenta, yellow) Note: Poor quality paper may reduce the print quality and cause paper jams or other problems. If you have print quality problems, switch to a higher grade paper.
Epson Stylus CX4400 Series Scanning USB Interface Scanner type Flatbed color Standard Based on Universal Serial Bus Specifications Revision 1.1 Photoelectric device CIS Effective pixels 5,100 × 14,040 pixels at 1200 dpi Connector USB Series B Document size 216 × 297 mm (8.5 × 11.7 inches) A4 or US letter size Cable length Under 6.
Epson Stylus CX4400 Series 4. Press in the tab on the edge guide and slide it left. 6. Flip the feeder guard back. Follow these guidelines when loading paper: ❏ Don’t load paper above the arrow on the edge guide. 5. Insert the paper, printable side up, against the right side. Then slide the edge guide against the paper. ❏ Load the printable side face-up. It’s often brighter or whiter than the other side. (The printed side is whiter or brighter on some papers.
Epson Stylus CX4400 Series Selecting the Correct Media Type 3. Load up to 10 envelopes at a time, flap edge left, printable side up, against the right side. The table below lists the settings you should choose for your paper in the printer software: Load the flap edge left, printable side up Paper Note: For best results, press each envelope flat before loading, or load one envelope at a time. 4. Slide the edge guide against the envelopes (but not too tightly). 5. Flip the feeder guard back.
Epson Stylus CX4400 Series Copying Scanning a Photo or Document You can make copies using letter-size (8.5 × 11-inch) plain paper or 4 × 6-inch photo paper. You can use your CX4400 Series to scan a photo or document and save it on your computer or other device, or to fax or email it to someone else. Copying a Document 1. Make sure the CX4400 Series is turned on. You can even restore faded color photographs or correct backlighting as you scan (see page 7 for details). 2.
Epson Stylus CX4400 Series You see the EPSON Scan standby window: Checking the Print Head Nozzles If your printouts are faint or have gaps in them, some of the nozzles in the print head may be clogged or ink may be running low in one or more of the ink cartridges. Follow the steps below to check the print head nozzles: 1. Turn off the CX4400 Series. 2. Load letter-size paper in the sheet feeder. 3. Hold down the y Stop button as you press the P On button.
Epson Stylus CX4400 Series ❏ Macintosh OS X: Open the Applications folder and select EPSON Printer Utility 2. Select CX4400 Series in the printer list, click OK, and select EPSON Status Monitor. Replacing Ink Cartridges ❏ When the red B ink light flashes, one or more ink cartridges are low on ink. ❏ When the red B ink light stays on, you need to replace the cartridge(s). You’ll also see a message on your screen when you print telling you which cartridge is low or expended.
Epson Stylus CX4400 Series 1. Make sure the CX4400 Series is on and the red B ink light is on but not flashing. 4. Press the y Stop button again. ❏ If another cartridge is low or expended, it moves to the _ position. Press the y Stop button again to see if more cartridges are low or expended. 2. Open the scanner and make sure its support locks in place. ❏ If no other cartridges are low or expended, the print head moves to the replacement position. Caution: Do not touch any area shown below. 5.
Epson Stylus CX4400 Series 11. Hold the scanner while you release the support. Then close the scanner. 7. Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package. Caution: Do not touch the green chip on the front of the cartridge. This can damage the ink cartridge. 8. Remove the yellow tape from the bottom of the ink cartridge. 12. Press the y Stop button to begin charging the ink. This takes about one and a half minutes.
Epson Stylus CX4400 Series You see the following: 6. Release the scanner support and close the scanner. 7. Repack the CX4400 Series in the original box or one of a similar size using protective material to keep it from moving inside the box. Keep the CX4400 Series level as you transport it. After transporting the CX4400 Series, remove the tape securing the print head, plug in the CX4400 Series, and turn it on.
Epson Stylus CX4400 Series 12 5/07
