User's Guide

Selecting the Scan Size
You can scan your images at their original size, or you can reduce or enlarge their size as you
scan them. You do this using the Target Size setting in Professional Mode.
Professional Mode
If you are going to scan your image to a particular size, you should select the Target Size
setting after previewing it, but before adjusting your scan area (indicated by the marquee).
This sets the scan area to the correct proportions so your image will not be cropped
unexpectedly.
For instructions on previewing your image, see Previewing and Adjusting the Scan Area. Then
follow these steps to select the Target Size setting: