User's Guide

If you are scanning with the ADF, see Adjusting the Color and Other Image Settings for
instructions.
If you are scanning from the document table, see Adjusting the Color and Other Image
Settings for instructions.
● Try selecting the following settings in the Configuration window: Color Control,
Continuous auto exposure , and Recommended Value on the Color tab. See
EPSON Scan Help for details.
● Check the Brightness setting in EPSON Scan.
If you are scanning with the ADF, see Adjusting the Color and Other Image Settings for
instructions.
If you are scanning from the document table, see Adjusting the Color and Other Image
Settings for instructions.
● Adjust the brightness using the Histogram in EPSON Scan’s Professional Mode. See
EPSON Scan Help for details.
● Check the brightness and contrast settings of your computer monitor.
Top
An Image on the Back of Your Original Appears in Your Scanned
Image
If your original is printed on thin paper, images on the back may be visible to the scanner and
appear in your scanned image. Try scanning the original with a piece of black paper placed on
the back of it. Also make sure the Document Type and Image Type settings are correct for
your original.
If you are scanning with the ADF, see Selecting Basic Settings for details.
If you are scanning from the document table, see Selecting Basic Settings for details.
Top
Ripple Patterns Appear in Your Scanned Image