User's Guide

Home > Maintenance
Cleaning the Scanner
To keep your scanner operating at its best, clean it periodically using the following procedure.
Turn off the scanner using its power
button.
Unplug the AC adapter cord from the
scanner.
Clean the outer case with a cloth dampened with mild detergent and
water.
If the glass surface of the document table gets dirty, clean it with a soft dry cloth. If
the glass surface is stained with grease or some other hard-to-remove material, use a
small amount of glass cleaner and a soft cloth to remove it. Do not apply cleaner
directly to the glass; apply it to the cloth and then clean the glass. Wipe off any
remaining moisture.
Make sure that no dust builds up on the surface of the document table. Dust can cause
spots in your scanned images.
If the underside of the ADF gets dirty, clean it as described in step 4. Also be sure to
clean the left side of the document table.