User's Guide

Home > Using the Network Image Express Card
Installing the Network Image Express Card
The EPSON Network Image Express Card (B808393) is pre-installed in the Epson GT-2500 Plus
version of the scanner. It is an option for the Epson GT-2500. The network card lets you use
your scanner over a network without having to connect the scanner to a server PC.
For details on using the card, see the documentation that came with it.
Caution:
Do not install any other optional card in your scanner, or you may damage your
scanner.
Turn off the
scanner.
Caution:
Do not install or uninstall the Network Image Express Card while the scanner is
turned on; otherwise damage may occur.
Unplug the power cord and disconnect all the cables from your scanner. (Do not
disconnect the cable securing the ADF to your scanner.)
Remove the two screws securing the shield plate using a Phillips-head screwdriver,
then remove the shield plate. Be sure to keep the screws in case you re-install the
shield plate later.