User's Manual

3-22 Using the Control Panel
ESCP2 and FX Menus
Use the ESCP2 or FX menu only if you have selected one of these
modes as your Emulation mode in SelecType or the Remote
Control Panel utility.
ESCP2 and FX menu items
Menu item Description
Font Selects a font by typeface; Courier is the default (see the
Technical Information manual for available fonts).
Pitch Sets the pitch in cpi (characters per inch) for the selected
Font: 10, 12, or 15 cpi, or Proportional.
Condensed Turns condensed printing On or Off; 15 cpi pitch
characters cannot be condensed.
T.Margin Specifies the margin from the top of the paper to the base
of the first printed line: 0.40 to 1.50 inches; 0.50 inch is the
default.
Text Sets the page length by the number of lines (1 to 81) in
1/6-inch increments; 62 lines is the default. If you change
Page Size, Orientation, or T. Margin settings, the Text setting
returns to its default value.
CG Table Selects the graphics or italics character table you want to
use; PcUSA is the default (see the
Technical Information
manual for details on the available character tables).
Country Selects an international symbol set; USA is the default (see
the
Technical Information manual for details on the
available international symbol sets).
AutoCR Sets the printer to automatically perform or not perform a
carriage-return then line-feed operation when the print
position exceeds the right margin; On, Off. (Most software
programs handle this function.)