User's Manual

3-4 Using the Control Panel
Continue
ALT
Press this key sequence to switch the
printer back on line after you have
cleared a problem. You can also use the
sequence to reset the printer back to the
default settings.
Press the ALT
and Continue buttons until
Reset appears on the control panel
display. This clears all data in the
printer’s memory.
Press ALT
and Continue until Reset All
appears on the control panel display.
This changes back all default settings for
all the printer’s emulation modes and
interfaces. It has the same effect as
turning the printer off and then back on
again.
Note:
Resetting clears all pending print jobs, so if you're connected to a
network, be careful not to disrupt another person's print job.
Form Feed Press this button when the Form Feed
light is flashing. The printer prints any
data remaining in its memory.
On Line Press this button to switch the printer
betwen On Line and Off Line status.