User's Manual

1-8 Handling Paper
2. From your application program, access the printer driver.
(See Chapter 2 for instructions.)
3. Click the Paper
tab.
4. Turn the
Duplexing option ON.
5. Select either Long Edge or Short Edge for the Duplexing
setting, depending on whether you plan to bind your
document at the top or the left side.
6. Select either
Front Page or Back Page for the Start On
option to specify whether printing starts on the front or back
of the first page.
7. Click OK
to save your settings and exit the printer driver.
8. Select the Print
command in your application program to
send the print job.
When you’re finished printing your two-sided document, access
the printer driver and change the Duplexing setting back to
Duplex Off.
Printing on Custom-size Paper
If you need to print on paper that is a different size from those
available in the printer driver, you can create a custom paper
size. Then you can select it from the Paper Format list and use it
to print whenever you want.
Follow these steps to print on custom-size paper with the
EPL-N2000 driver:
1. Load the custom-size paper in your printer.
2. From your application program, access the printer driver.
(See Chapter 2 for instructions.)