Parts User Manual

Configuring the EPL-N2000 for OS/2 6-11

4. Create an initialization file in the remote print service

directory.

❏ If your network protocol is TCP/IP, the format of the file

is as follows:

REMPRT <serial number> <portname>

❏ If your network protocol is NetBEUI, the format is as

follows:

REMPRT3 <serial number>

Note:

The remote print service uses this file at startup to assign the printer

to the workstations’ portnames. The file identifies the shared

EPL-N2000 printer by the serial number of its Ethernet card, and

each workstation by the portnames assigned in steps 2 and 3. For

example, if the printer’s Ethernet card has the serial number

10900416, and the printer is shared by three workstations, the

initialization file might contain the following:

REMPRT 100900416 PORTA PORTB PORTC

5. Edit STARTUP.CMD in your workstation’s root directory to

include the REMPRT command and the initialization file as

the last line.

❏ If your network protocol is TCP/IP, type the following:

\EPNET\REMPRT @ REMPRT.INI

❏ If your network protocol is NetBEUI, type the following:

\EPNET\REMPRT @ REMPRT3.INI