Parts User Manual

Configuring the EPL-N2000 for OS/2 6-7
7. Type the following to change to the remote print service
directory:
CD\EPNET
Your remote print service directory should contain the files
listed in the following table:
Configuring Printers for Use with Remote Print Service
After you finish copying the piping software, follow these steps
to complete setup of remote print service:
1. From the remote print service directory, use the ADDPORT
command to define a port for the first EPL-N2000. The
format is as follows:
ADDPORT <portname>
Repeat this step for each EPL-N2000 to which you want to
pipe output.
TCP/IP NetBEUI Description
ADDPORT.CMD ADDPORT.CMD Adds ports on the
server
DELPORT.CMD DELPORT.CMD Removes ports from
the server
PORTCHG.EXE PORTCHG.EXE Program used to add
or remove ports
REMPRT.EXE REMPRT3.EXE Remote Print Service
program
REMDRV.EXE REMDRV3.EXE Remote Print Service
driver
REMSTAT.EXE REMSTAT3,EXE Printer status program