Parts User Manual

6-4 Configuring the EPL-N2000 for OS/2
❏ If your protocol is TCP/IP, enter the following
command:
RPRINT <serial number> </portname>
❏ If your protocol is NetBEUI, enter the following
command:
RPRINT3 <serial number> </portname>
Note:
Portname designates the port that will be redirecting to the remote
printer. If no port is defined, the program assumes LPT1. For
example, the command RPRINT 10900416 causes print files
directed to LPT1 to be received by an interface with the serial number
10900416.
7. Repeat step 6 for each port that you want to redirect.
8. Reboot the workstation.
All printed output spooled to this workstation will be redirected
to the EPL-N2000 printer(s) specified in the STARTUP.CMD
entry.