Parts User Manual

Configuring the EPL-N2000 for Windows NT 4-5
Follow these steps:
1. Press the status sheet button on the Ethernet card plate to
print a network adapter status sheet for the EPL-N2000.
(This sheet provides important information about the
printer’s node address and serial number.) See Chapter 1 for
more information.
2. Find out what the IP addresses are for several devices in use
on the network segment to which the printer is connected.
Note:
The address you assign to the printer must contain the first three
octets common to IP addresses for all devices on that network
segment, and a unique fourth octet.
3. Double-click the EPSON Net! (NT) icon to start the utility.
The following dialog box appears:
4. Select the printer’s serial number from the list and click
Open. The IP Config dialog box appears. This dialog box
shows the printer’s current IP address.