Parts User Manual

Configuring the EPL-N2000 for Windows NT 4-3
Note:
It’s a good idea to choose a name that’s easy for other users to
remember, such as a department name, or the name of the printer’s
owner. A period is allowed if it is not the first character. However,
you cannot use a space or any of the following characters:
/ \ : ; . * | + [ ] “
4. Select the printer driver from the Driver pull-down menu.
5. Select Other from the Print To pull-down menu. The Print
Destination dialog box appears.
6. Select (HP Network Port) from the Available Print
Destinations list. The Add an HP Network Peripheral Port
dialog box appears.
Note:
If HP Network Port does not appear as a choice, the DLC transport
protocol and driver are not installed.
7. Enter a name for the port in the Name box.
Note:
Make sure you don’t use the name of an existing port, such as LPT1,
or of any other existing DOS device.
8. Select LAN Hardware Address (Node Address) from the
Card Address list. (This address matches the address listed
under Node Number on the printer status sheet.)
9. Click the Timer button and select the Job Oriented option.
If you want to share the printer, click the Share the Printer
on the Network box.
Note:
The share name defaults to the printer name. You can change it if
you want.