Parts User Manual

4-2 Configuring the EPL-N2000 for Windows NT
This chapter describes how to configure the EPL-N2000 for use
as a remote printer on a Windows NT server running either DLC
or TCP/IP.
Before configuring the EPL-N2000 for Windows NT, do the
following:
❏ Make sure the EPL-N2000 is connected to the network and
turned on. See Chapter 1 for more information.
❏ If you’re using DLC, make sure that the DLC protocol and
driver are installed. See your Windows NT documentation
for details. (If you’re unsure, check the list of installed
network software in the Networks dialog box.)
❏ If you’re using TCP/IP, make sure that standard TCP/IP
software is installed. See your Windows NT documentation
for details.
Configuring on a Windows NT Server Using DLC
You don’t need any special network setup utility when you
configure the EPL-N2000 on a Windows NT server using DLC.
Follow these steps:
1. Select Print Manager from the Main group.
2. Choose Create Printer from the Printer menu. The Create
Printer dialog box appears.
3. Enter a name for the printer in the Printer Name field.