Parts User Manual

2-14 Configuring the EPL-N2000 for NetWare
6. Select a port number in the Configured Printers list and
press Enter.
7. Select the name of the EPL-N2000 on the Printer
Configuration menu. Then highlight the Printer Type and
select LPT1.
Note:
Although you can define the printer port as COM 2, it is
recommended that you define it as LPT1 to maintain compatibility.
8. Press Esc; then press Enter to save changes.
9. Select Queues Serviced by Printer from the Print Server
Configuration menu and assign a queue to the print server
port from the Available Queues list.
10. Press Esc to exit.
Configuring the Operating Mode and Making Other
Changes
After you define the EPL-N2000 on a NetWare print server, you
are ready to use EPSON Net! for NetWare to configure it to
operate as a remote printer. You can then make the following
changes:
❏ Change the port number to allow the EPL-N2000 to connect
to a different port on the NetWare print server.
❏ Enable or disable hunting, which allows the EPL-N2000 to
connect to the first available active port on the print server.
(This feature is useful if the NetWare print server has many
ports.)