Parts User Manual

Configuring the EPL-N2000 for NetWare 2-7
4. Make sure Print Server is selected as the operating mode. In
the Print Server name box, enter a unique name up to 32
characters long.
Note:
It’s a good idea to choose a name that’s easy for other users to
remember, such as a department name, or the name of the printer’s
owner. A period is allowed if it is not the first character. However,
you cannot use a space or any of the following characters:
/ \ : ; . * | + [ ] “
5. Click Add at the bottom of the dialog box to assign a print
queue to your print server.
The Add Queue dialog box appears. The Queue drop-down
list indicates which queues are available on this NetWare file
server.
6. Select a print queue from the Queue list, or create a new
queue by entering its name in the Queue box.
7. Select a priority level for the queue in the Priority box. You
can set a level from 1 to 10, with 1 having the highest
priority.
8. Click OK. The NetWare Config dialog box appears again.