Parts User Manual

1-2 Getting Started
This chapter explains how to connect the Ethernet interface card
to the network, as well as how to perform such basic tasks as
reading the card’s lights, using the card to print a status sheet,
and resetting the card.
Connecting the Ethernet Interface Card to the
Network
Your EPL-N2000 comes with a preinstalled Ethernet interface
card that you can connect to your network using either a
10BASE-T or 10BASE2 network cable. (Your printer includes a
coaxial Y-connector for a 10BASE2 connection.)
Follow these steps to connect the card to your network:
1. Make sure the Interface setting in the SelecType Setup Menu
is set to Auto, then turn off the printer.
Note:
This setting ensures that the card automatically switches mode to
match the network interface used. See Chapter 3 in the User’s Guide
for information on SelecType settings.