User's Manual

Level 2 Options
l STOP BIT - Use this option to set the number of stop bits
on each character of information sent to the printer. Stop bits
signal the end of a character.
Menu/submenu
Available options
1 or 2
l DTR - Use this option to turn the printer’s ready
communications protocol ON or OFF. You can use DTR
protocol in combination with the XON/XOFF option setting.
Menu/submenu Available options
ON or OFF
l XON/XOFF - Use this option to turn the XON/XOFF
communications protocol on or off. You can use XON/XOFF
protocol in combination with the DTR option setting.
Menu/submenu
Available options
ON or OFF
l ENQ/ACK - This option appears but is not effective in
your printer. Leave it set to OFF.
Menu/submenu
Available options
ON or OFF
3-28 SelecType