User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Level 2 Options
After you select the serial interface, you enter one of the submenus
shown below.
Menu/submenu
Available options
SERIAL
WORD LENGTH
BAUDRATE
PARITY
STOP BIT
DTR
XON/XOFF
ENQ/ACK
DSR
CTS
These settings must match the settings your computer is using.
Check your computer’s manual.
The interface options are the same for both the RS-232C and
RS-422
serial interface modes.
l WORD LENGTH - You can select B-bit word length or
7-bit word length. See your computer manual and software
documentation for the proper setting. The factory setting is
B-bit.
Menu/submenu
Available options
7 or 8
3-26
SelecType