User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Turning On the Printer
The indicator lights on the control panel light briefly when you
turn on the printer. The following messages appear as the printer
performs a series of internal tests and warms up:
CAUTION:
• Do not open the printer’s covers while the printer is
warming up or printing.
l After you turn off the printer, always wait at least five
seconds before turning it back on.
It takes approximately 70 seconds for the printer to complete its
power-on routine. When the READY message appears, you can
use the printer. If the display remains blank, see Chapter 6 for
troubleshooting information.
Chapter 2 tells you how to test your printer, connect it to a
computer or computers, and begin using it with software.
1-22
Setting Up