User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Assembling
Attaching the power cord
1.
Before you attach the power cord, make sure the power switch
on the top of the printer is turned off. It is off when the O on
the switch is pressed down, as shown below.
WARNING: If the rated voltage of the printer and your
outlet voltage do not match, contact your dealer for
assistance. Do not plug in the power cable.
2.
Insert the power cord into the socket at the back of the printer,
as shown below. Then plug the other end of the power cord
into a properly grounded outlet.
1-18 Setting Up