User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Memory Options
Follow these steps to install a memory chip set:
1.
Make sure all the pins on the chip are aligned. They should
point inward at slightly less than a 90” angle, as shown below.
If any of the pins are bent incorrectly, gently push them back
into alignment.
2.
Line up the pins on the RAM chip with the holes in the
socket. Be sure that the small notch on the end of the chip is
toward your right.
Options
7-29