User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
The Face-up Output Tray
The printer normally delivers paper face down on top of the
printer. If you want face-up delivery, you can install the optional
face-up output tray. This tray gives you immediate viewing of
your printed output and is recommended for printing on media
such as labels and overhead transparencies that require a straight-
through paper path.
Installing the face-up output tray
1.
Unpack both the tray and the static brush from the carton.
2. Turn off the printer.
WARNING: If you have used the printer recently, let it
cool before you proceed.
3.
Snap the static brush onto the upper edge of the face-up
output slot shown below.
7-16
Options