User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM

Decline in Print Quality
Horizontal black or white bands appear on printed pages.
l The transfer charger wire may be dirty. Clean the wire as
described in Chapter 5.
l There may be a problem with the imaging cartridge.
Replace it as described in Chapter 5.
Periodic dirty marks appear in the printout.
l There may be a scratch on the drum of the imaging cartridge.
Replace the imaging cartridge as described in Chapter 5.
Toner smudges across the printed pages.
l The bottom of the imaging cartridge may be dirty. Remove it
and wipe the bottom of the cartridge with a clean, dry cloth.
Then reinstall it as described in Chapter 5.
l There may be a problem with the imaging cartridge.
Replace it as described in Chapter 5.
Ghost images appear on printed pages.
l The cleaning pad may need to be replaced. Replace it as
described in Chapter 5.
l The inside of the printer may be dirty. Clean inside the printer
as described in Chapter 5.
l There may be a problem with the imaging cartridge.
Replace it as described in Chapter 5.
Troubleshooting
6-35