User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Transporting Your Printer
If you need to move the printer a short distance, such as from one
room to another, make sure you keep the printer level to avoid
spilling toner.
If you are shipping the printer some distance, repack the printer
and its accessories in the original packing materials to avoid
damaging them.
CAUTION: Do not ship the printer with the imaging
cartridge installed.
Packing for transportation
To pack the printer, assemble all the original packing materials and
some strong packing tape.
1.
Be sure your printer and computer are turned off. Then,
remove the power cord and the cable connecting your printer
and computer.
2.
If the optional lower paper cassette or the optional face-up tray
is installed, remove and repack them. Remove any identity or
font cards or font cartridges.
3. Remove any paper from the paper cassette.
WARNING: If the printer has been on, the fuser may be
hot. Let it cool before proceeding.
5-22 Maintenance and Transportation