User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Cleaning the Printer
Removing spilled toner
If toner spills inside the printer, do not use the printer until you
remove all the spilled toner. Follow these steps:
1.
If only a small amount of toner is present, carefully wipe out
the inside of the printer with a damp cloth.
2.
If a large amount of toner is present, use a small vacuum
cleaner (available from computer supply stores) to remove it.
CAUTIONS:
l Toner or any other fine powder can damage some
vacuum cleaners. Be sure to read the instructions for
your vacuum cleaner before you use it on spilled
toner.
l When you clean the paper input path, be careful not
to touch the transfer charger wire with the vacuum
cleaner.
Note: If you spill toner on your clothing, rinse it off with cold
water. Do not use hot water; it may cause the toner to leave a
permanent stain.
5-20
Maintenance and Transportation