User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Cleaning the Printer
Cleaning inside the printer
Fine particles of paper dust and ordinary dust can collect inside the
printer. Follow the steps below to clean the inside of the printer:
1. Make sure the printer is turned off.
2. Open the front cover.
3.
Raise the printer’s top cover to the upper position, as shown
below.
WARNING: Opening the printer exposes the fuser,
which is marked by a caution label. If the printer has
been on, the fuser may be hot; be careful not to touch it.
Let the printer cool before you clean the inside.
4. Remove the imaging cartridge from the printer.
Maintenance and Transportation
5-17