User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Replacing Consumable Parts
Replacing the cleaning pad
After you clean the transfer charger wire and glass lens, you can
replace the cleaning pad and install a new imaging cartridge.
1.
Make sure the printer is still open to the upper position.
2.
Locate the cleaning pad inside the printer. It is the long black
pad with a yellow felt handle near the back of the printer.
WARNING: If the printer has been on, the fuser may be
hot. Let it cool before you replace the cleaning pad.
5-8
Maintenance and Transportation