User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Replacing Consumable Parts
CAUTION: When cleaning the transfer charger wire, do
not press too hard on the wire. It is delicate and can
break if you apply too much pressure. Also, never touch
the wire with your fingers; the oil on your fingers may
damage it.
4.
Clean the transfer charger wire by gently rubbing the cotton
swab along its length as shown below. Only wipe from left to
right. Do not moisten the cotton swab.
If this does not improve your printing, contact your dealer for the
availability of a special cleaning tool.
5-6 Maintenance and Transportation