User's Manual
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP
- CHAP 2-TESTING AND CONNECTING YOUR PRINTER
- CHAP 3-SELECTYPE
- CHAP 4-PAPER HANDLING
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLSHOOTING
- CHAP 7-OPTIONS
- APPENDIX A-TECHNICAL SPECIFICATIONS
- APPENDIX B-HP EMULATION MODE
- APPENDIX C-LQ AND FX EMULATION MODE
- GLOSSARY
- INDEX
- QUICK REFERENCE
- PRINTER DIAGRAM
Loading Paper Manually
5. For printing on labels, envelopes, transparencies, and heavy
paper, install the optional face-up output tray. Set the paper
path selector on the back of the printer to the face-up position.
6.
Press the MANUAL button. An M appears on the right side of
the display, as shown below.
7.
Make sure the ON LINE light is on; you can then send data to
the printer from your computer.
8. To return to automatic loading, press the MANUAL button
again.
Note: The manual feed selection is an attribute of the channel
you are using. This means you can use the panel to select
manual feed for each channel separately; the setting remains,
even if the printer mode for that channel is switched. Also, this
selection can not be canceled by printer command but only by
the panel.
4-10
Paper Handling