Product Information Guide
EPL-8000
In this section, status messages are preceded by
[S],
warning
messages are preceded by
[W),
and error messages are preceded by
p].
In some cases the message you see on your display
aI00
shows
the printer mode.
IW
[El
Fl
PI
M
[El
[El
IS1
[El
(El
s[:,:;
nz;:;;R’,
F,-!?
I;,,
’
_I.
i,
The printer has insufficient memory available in the channel
displayed. You may have changed the printer mode, increased
the RX-BUFFER
SIZE
setting, or changed the CH
INDIVIDUAL setting. To correct the error, decrease the
RX-
BLWER
SIZE setting or change the CH INDIVIDUAL setting
in SelecType. Changing the CH setting from INDIVIDUAL to
AUTOSENSE may solve this problem. If necessary, add
memory to your printer.
CGwCEL
i’11WJliL
FEED
There is no
paper
in the manual-feed tray when you have
selected manual feed. To cancel manual feed, press the
h4ANUAL
button to feed
paper
from the cassette. This message
alternates with the SET MANUAL message.
il&,Rfl
p~E/-~~tR’$J
!:@FFiC&t
This message indicates that the combined memory of the
cards in slots A or B exceeds
MB.
Remove one or both of
the
ords
and press the CONTINUE button.
CHflF
CREX
I
Nij
The printer is creating characters.
::~lp’i’
Et.10
:.;ij;
Multiple-copy printing is canceled (you pressed the COPY
END button with the printer off line).
Oi’llt!ER
IJFEN
The
primfs
cover
is
open.
Close the printer
COV~C
to
continue printing
YGTG
The printer has
dvcd
data but is not yet printing, or is off
line. To resume printing, press ON LINE if the printer is off
line,orpressFEED.
FEED
JFlM
Paper is not feeding into the printer from the specified
cassette or has jammed on its way into the printer. If the
paper
ls
jammed at the paper cassette, open the printer case,
remove the jammed paper from the standard paper cassette or
optional
pays
cass&e
and then close the printer’s covers.
FONT
CREFlTI
t4G
The printer is
crating
a font.
‘GRIT+!
I
!I:
DR,9!.1!
I
NG
The printer is composing a graphic.
The printer cannot read the card inserted in the slot indicated
on the dispiay. To correct the error, press CONTINUE. If the
error message remains, make sure the printer is off line and
remove the card. If the red
CONllNUB
light still flashes,
press CONTINUE
The printer is being initialized to the factory settings.
1
fJ:fF
7
I
b$Tj~i
1
f.!li
CEyTi;
The imaging cartridge is not installed.
I
t,ScF’
y;-,’
*
L.1
!
The standard paper cassette is not installed.
[El
19
@1
IS1
[El
(El
[El
Cl
[El
IS1
PI
ISI
[sl
VI
-,
,._’
,:
.-
I,_._.
.
“:
:.y
:
I;;
p
I
I
The printer has insufficient memory available for the current
task. To correct the error, press CONTINUE. If the message
remains, press
RESET
or initialize the printer.
You can also clear this error by turning the printer off and
back on again. However, it may be necessary to simplify the
page you are trying to print or add more memory to the
printer.
If you assign PostScript to more than one channel, this
message appears when you attempt to exit from SelecType.
Press
/7J
to return to MODE ASSIGN and change the
assignments.
r,
-.,-.,
-
t
_,_:I_
c,iJiTl-EF
FiJ-1
Text or graphics data has filled the printer’s buffer and the
printer has ejected an incomplete page. Press CONTINUE to
clear the error. You may need to add more memory to your
printer.
The printer is feeding paper.
r-.,-.‘,i-?
8
Pi
i,-
JKK
Paper is not being fed into the printer or paper is jammed in
the paper path.
Opm
the printer and clear the jammed paper
as described later in this chapter.
TGCCC
f-01
iT
_a.
__.
There is no paper in the standard paper cassette or the
optional lower paper cassette (if installed). Load more paper
into the selected paper cassette.
F;pEF,
CtiJT
QiJTI:t
:A::A:~:
There is no paper in the standard cassette or the optional
lower paper cassette (if installed). The display prompts you to
load paper
into
the specified cassette.
7’GPEE
i:li-lT
IIIFT
X>::):
There is no paper in the optional lower paper cassette.
The display prompts you to load the correct paper size into
the lower paper cassette.
r
---_-
-
r’HrCp’
I-BUT
~T[J
;..z”..;x
There is no paper in the standard paper cassette.
The
display
prompts you to ioad the
correct
paper size into the cassette.
The printer has received data and is printing.
=
F
i
1;;
5
TI]~
>.:
i-:s.Y
The printer stops printing during the multi-copy print
operation.
p
=.;
,,.l.\.
. iti.,‘, ,I
The printer is using the intelligent emulation switch and is
not in a timeout status. It can use either one of the modes
shown on the display.
lTJ#l
1:
het1.p
j/z:.
;I..;
ME
The printer is checking the available RAM (X.X
=
capacity).
C’EGD’?
5.
I
The printer is ready to print.
Laser Printers
3m92
EPL-8000-9