User's Manual

HP Emulation
The result varies depending upon which method you use, as shown
in the table below.
Off/On
Button
clears
clears
ESC E
Command
prints data in
buffer and clears
Data in Buffer
Permanent
Downloaded
Fonts/Permanent
Macros
clears
Temporary
Downloaded
Fonts/Temporary
Macros
clears
clears
SelecType
Settings*
clears
Power
RESET/CONTINUE
does not clear
does not clear
does not does not
1 does not
change change
change
* After any reset, the printer is set to the SelecType settings, overriding any
software commands that have been set.
Note: A font or macro can be designated “permanent” or
“temporary” through the use of printer commands.
Paper handling
With the EPL-6000, the paper size is not determined by the paper
tray as it is with an HP LaserJet printer. Use the PAPER SIZE
option in SelecType to set any of the four paper sizes supported by
the printer. See Chapter 3 for SelecType information.
5-6
Printer Modes