User's Manual

Using SelecType
SelecType practice example
To better understand how to use SelecType, you may want to try
this example.
Turning off the buzzer
This example shows how to turn off the buzzer.
1. Press the SelecType button to enter SelecType. This message
appears:
2. Press the button nine times or simply press the button once,
until the BUZZER = ON* appears in the display. The word
BUZZER is blinking.
3. Press the SET button to move to the list of buzzer options. The
word ON starts blinking.
4. Press the button to move to the OFF option.
5. Press the SET button to set the option. The asterisk (*) now
appears next to the word OFF. The word BUZZER starts blinking
again.
Now exit SelecType by pressing the SelecType button. Then hold
down the RESET/CONTINUE button for three seconds until RESET
appears in the display.
Using the Printer
3-19