User's Manual

Using SelecType
Set an option
When you reach the option you wish to use, press the SET button.
An asterisk (*) appears next to the option, indicating that it has been
set. The option stops blinking and the function starts blinking. To
implement your SelecType changes, see the section on exiting
SelecType later in this chapter.
If you want to return to the list of menu functions without setting a
new option, make sure the current option (the one with the asterisk
next to it) appears in the display. (If necessary, use the arrows to
move to the current option.) Press the SET button. The option stops
blinking and the menu function begins blinking. You can now move
to a new function.
Display submenu functions and select options
When you want to enter the emulation or interface submenus from
the SelecType main menu, follow the steps described below.
Note: Options for each function are described in the SelecType
Options section later in this chapter.
HP emulation submenu
To enter the emulation submenu, follow the steps described below:
1. Press the or button until you see the EMULATION function
in the display.
2. Press the SET button to switch to the current option. If the
HPLJ2* option does not appear in your display, use the or
button to select it.
3-14 Using the Printer