User's Manual

HP Emulation
If you set the paper size with a print command that differs from the
size selected in SelecType, the message PS CHANGE appears.
Press the RESET/CONTINUE button to clear the error; the printer is set
off line.
After clearing the error, you have two options:
1. Change the paper in the cassette; then enter SelecType and
change the paper size to match. Press the ON LINE button after
exiting SelecType to continue printing.
2. Alternatively, press the ON LINE button to continue printing on
the current paper. (The message PAPER SIZE ERROR
appears in the display.)
For certain nonstandard sizes of paper, you may need to use the
manual feed option described in Chapter 4.
Character clipping
If a character is partially outside the printable area, the HP LaserJet
does not print any portion of the character. The EPL-6000 prints that
portion of the character within the printable area, making it easier to
tell when you have exceeded your margins.
Printer Modes 5-7