User Setup Information

System Requirements

For Macintosh Users:

• Apple iMac or Power Macintosh

G3 computer with USB port

• For iMac: Mac

OS 8.1 or later

For Power Macintosh G3: Mac OS 8.5 or later

Note: If your iMac is running OS 8.1, you’ll need to update your

system as described on page 8 of this guide.

• At least 32MB of RAM (64MB recommended)

• At least 6MB of hard disk space

• VGA, Super VGA, or better display adapter and monitor

• Double-speed (or faster) CD-ROM drive for installing the

printer software

• Shielded USB “AB” cable from Series A (computer) to

Series B (printer), up to 6.5 feet (2 meters) long

For Windows Users:

• IBM

compatible PC with a 100 MHz Pentium processor or

higher

• Microsoft Windows 98 (for USB connection) or Windows 95,

98, or NT 4.0 (for parallel connection)

• At least 16MB of RAM (64MB recommended)

• At least 10MB of hard disk space

• VGA, Super VGA, or better display adapter and monitor

• Double-speed (or faster) CD-ROM drive for installing the

printer software

• For parallel connection: high-speed, bidirectional, IEEE-1284

compliant parallel cable (6 to 10 feet long); the cable must

have a D-SUB, 25-pin, male connector for your computer and

a 36-pin, Centronics

compatible connector for the printer

For USB connection: a computer running Windows 98 with a

Windows 98 compliant USB port and a shielded USB “AB”

cable from Series A (computer) to Series B (printer), up to

6.5 feet (2 meters) long