User's Manual

Using Advanced Camera Features
1-13
A
B
1
An arrow appears next to the WB (white balance)
symbol on the display panel.
9 Take pictures with the LCD screen as usual. (See
page 3-9 in Getting Started for instructions.)
10 To switch back to auto white balance, follow steps 1
through 6 above, but change from
Lock to Auto.
Photographing With User Defined White
Balance
Make sure the camera dial is set to View, then follow these
steps to take pictures with fixed white balance:
1 Press the SEL button to display the menus.
2 Press or to display the Conditions menu:
3 Press the SEL button to display the menu options:
4 If the advanced settings are set to Auto (gray and not
selectable), highlight the Auto/Manual advanced settings
icon and press the
SEL button.
5 Press to highlight the white balance icon .
6 Press the SEL button to view the white balance menu.
7 Press or to change the white balance setting to
(Setting) and press SEL.
The LCD screen shows a live preview and indicates the
area that will be used for the setting.
Lily.book Page 13 Tuesday, March 2, 1999 4:06 PM