User's Guide

• Do not carry the product by its control panel; this may damage the product.
1. Turn off the product.
2. Lift up the scanner and check to see if the print head is in the far right position (the home position). If
not, turn on the product, wait for the print head to move, then turn the product off again.
3. Lift up the scanner, remove the transportation lock from its storage position, and install it as shown.
4. Secure the transportation lock with tape.
5. Lower the scanner.
6. Remove all the paper from the product.
7. Unplug any connected cables.
8. Close the output tray.
9. Lower the control panel.
239