User's Guide

5. Select Wi-Fi Setup Wizard and press the OK button.

Note: If you need to disable the wireless network to set up your product on an Ethernet network,

select Disable Wi-Fi instead. Then follow the instructions on the Start Here sheet to set up your

product on a wired network and install the necessary software from the product CD. The installer

program guides you through network setup.

6. Select the name of your wireless network or enter the name manually.

Note: To enter the wireless network name manually, select Other SSIDs and press the OK button.

Use the displayed keypad to enter your network name, as described in the next step.

7. Enter your wireless password (or network name and then password) using the displayed keypad.

• Press the arrow buttons to highlight a character or a function button displayed on the keypad.

Then press the OK button to select it.

• To change the case of letters or select symbols, select AB12 (uppercase), ab12 (lowercase), or

Symbol and press the OK button. Then highlight an option and press the OK button to select it.

• To enter a space, select Space and press the OK button.

• To delete characters, select the back arrow and press the OK button.

• When you finish entering characters, select Done and press the OK button.