User Setup Information

Setup
This guide is designed to help you install your printer and
set up the software as quickly as possible in a Microsoft
®
Windows™ environment. If you are not running Windows, use
procedures 1 through 8 in this guide to set up the printer. Then
see Appendix B in your Reference Guide for information on how
to install and use the EPSON
®
Control Panel for DOS.
1 System requirements
To use the printer and the software included with the printer,
you need the following:
0
A 386-based or higher IBM
®
PC or compatible
0
MS-DOS
®
3.3 or higher
0
Microsoft Windows 3.1 (not required if you install the
EPSON Control Panel for DOS)
0
4MB of RAM installed on the computer
0 1.3MB of hard disk space
To connect the printer to your computer, you also need to
obtain a shielded parallel interface cable.
Setup 1