Operation Manual

Introduction

The EPL-N2000 printer contains an Ethernet

card for use on your

network. This manual covers information only about the Ethernet

card that comes installed in the printer and the utility software

that configures it for network printing. For information about the

printer, see your printer user’s guide.

Note:

This manual is written for network administrators, and many of the steps

included here require detailed network knowledge and administrator

rights.

The Ethernet card can connect directly anywhere on your network

using a 10BASE2 or 10BASE-T cable. The card automatically

selects the correct interface when it connects to the network. In

addition, it supports IEEE 802.2, IEEE 802.3, and Ethernet II

network protocols.

Because the Ethernet card supports multiple protocols and

automatically detects the protocols on your network, you can print

from DOS, Microsoft

Windows

, Apple

Macintosh

, UNIX, and

IBM

OS/2 applications.

Use EPSON Net!, the utility software provided with your printer,

to quickly and easily configure the Ethernet card to use protocols

such as Novell

NetWare

, Microsoft IPX/SPX, Microsoft TCP/IP,

EtherTalk

, and NetBIOS and TCP/IP for OS/2 Warp and Warp

Connect.

Note:

The EPSON Net! utility software only configures the Ethernet card to

work with the protocols that exist on your network. This does not imply

that you can use all of the above mentioned protocols in your network or

operating system. The protocols that the Ethernet card can use may vary

depending on the operating systems used and network configuration.

Proof Sign-off:

Nishi _______

Grady _______

Printing with Network for administrator

Reference Guide

A5 size Introduction

’96/11/20 pass 0

Introduction