Service manual

EPSON EPL 5800 Revision B
Adjustment Adjustment 90
4. When the following window appear, input the serial number of the printer and click
“Ok” button to store the USB ID information to an EEPROM on the main board of the
printer. Take a note of the USB ID value displayed in the status window of the
program, and this should be referred to when you check the inputted USB ID later on.
USB ID CONFIRMATION
When you re-define the USB ID, make sure to verify it with the following procedure.
1. After executing the program and selecting the printer, click on “Verify USB ID” radio
button.
2. When you clicking on “OK” button, the program prints the status sheet . Then, confirm
that the USB ID value printed on the status sheet is the same as the one you have
confirmed when you input it.
CHECK
PO INT
USB ID is 18-digit value and the program automatically generates a
rest of ID based on the serial number inputted by the operator.
CAUTION
Make sure to set a paper in the printer before selecting this function,
as the program execute the status sheet print operation for checking
input USB-ID.