Service manual

EPSON EPL 5800 Revision B
Adjustment Adjustment 88
5.1.2 Interlock Switch Position Adjustment
With the power ON, if the printer does not become ON when the top cover is closed,
perform the position adjustment of interlock switch (S2) by the following procedure.
1. Open the top cover, and remove the left cover, the right cover and the front cover.
2. Loosen the screw fixing interlock switch (S2), and close the top cover completely.
3. Move the interlock switch (S2) up and down, and tighten the screw where the switch
turns ON.
Figure 5-2. Interlock Switch Position Adjustment
4121s082
S2