Service manual

EPSON EPL-5800 Revision B
Disassembly and Assembly Disassembly Procedure 77
4.2.13 Main Motor Assembly Removal
1. Remove the rear cover.
2. Remove the main motor assembly. (three screws, one connector)
Figure 4-18. Main Motor Assembly Removal
4.2.14 Fusing Unit Removal
Replace the fusing unit by unit basically every about 50,000 sheets.
1. Remove the right cover, the left cover, and the rear cover.
2. Remove the fusing unit. (three screws, three connectors)
Figure 4-19. Fusing Unit Removal
NOTE:
If you need to disassemble the fusing unit because of image quality
problems and defective components, follow the instruction in “Fusing
Unit Disassembly” on page 78.
4121s054
CAUTION
The life span of the transfer roller and fusing unit are the same. So, if
you need to replace the fusing unit because of worn-out etc., make sure
to replace the transfer roller as well.
4109s56
3504
3704
3504