Service manual

EPSON EPL-5800 Revision B
Disassembly and Assembly Disassembly Procedure 72
4.2.4 Paper Empty Sensor (PE1) Removal
1. Remove paper feed roller cover.
2. Remove the paper empty sensor (PE1) and pull out the connector.
Figure 4-8. Paper Empty Sensor (PE1) Removal
4.2.5 Right Cover Removal
1. Remove the right cover. (two screws, two hooks)
NOTE:
When installing the right cover, insert two hooks at the bottom of the
right cover to the frame.
Figure 4-9. Right Cover Removal
4121s073
Paper Feed
Roller Cover
Paper Empty Sensor
4121s045