Service manual

EPSON EPL-5800 Revision B
Product Description Controller Specification 25
1.4.3.2 USB Interface
Supports Windows USB PnP.
Supports the 18-digit USB ID as follows:
**P++YYMMDDhhmmssR
**: A number of 00 to 99 and “01” is assigned for this model.
Acquired in serial order for each model.
P: Identifier. “P” indicates a page printer. Always “P” for
page printers.
++: PC number of assembly line. (00~99)
YY: The year of assembled date. (lower two digits; 00~99)
MM: The month of assembled date. (1~12)
DD: The assembled date (1~31)
hh: Hour of assembled time. (0~23)
mm: Minute of assembled time. (0~59)
ss: Second of assembled time. (0~59)
R: Reserved and always “0” in this model.
Device ID in Printer Class conforms to 1.4.3.1 "Parallel Interface"..
1.4.3.3 Type B Interface
EPL-5800 is equipped with one Type-B option I/F slot as standard.
Main System Type: MTP1200dpi, PW10200dt1200dpi, PRG(****)rev,
AP500ma, SPD0fast, D4
****: ROM version
Printer Name: Factory default setting is the same as one of Product
Name.
Product Name: EPL-5800
Emulation Type: See the Table 1-17.
Entity Type: See the Table 1-17.
CAUTION
The USB ID is stored on EEPROM of the main board, and you have to
re-assign the ID when you replace the main board to new one in
repair.
Refer to Chapter 5 “Adjustment” for the details.
Table 1-17. Emulation Type and Entity Type
Emulation Emulation Type Entity Type
PCLXL PCLXL EPSONPCLXL
LJ4 PCL5E-00 EPSONPCL5
GL/2 HPGL2-01 EPSONHPGL2
PS POSTSCRIPT-00 LaserWriter
FX ESCP9-84 EPSONFX
ESCP2 ESCPL2-00 EPSONLQ2
1239X PRPXL24-01 EPSONPRPXL24
ESC/Page ESCPAGE-04 EPSONPAGE4