Service manual

EPSON EPL-5800 Revision B
Product Description Basic Specifications 18
1.2.6 Storage and Transport Environments Including
Consumables
Temperature and humidity: See table below.
Barometric pressure: 460 to 760 hPa
Dropping: No abnormalities according to JIS Z0200-1994 Level 1.
Free drop directions: 1 corner, 6 faces, 3 edges
Vibrations:
"
Frequency 5 to 100 Hz, 100 to 5 Hz
"
Acceleration 1G
"
Sweep time 10 minutes (each way)
"
Direction of vibrations 3 directions
"
Vibration time 60 minutes in X, Y, Z directions
(total 180 minutes)
1.2.7 Electric Characteristics
These items do not include the options.
AC line noise:
"
Pulse width: 50 to 1000 ns
"
Pulse polarity:
+/−
"
Repetition: asynchronous
"
Modes: common/normal
"
Voltage: 1kv (no component damage to 2kv)
Transient outage: DIP 100% (at rated voltage-10%) for one cycle
with normal print quality.
Electrostatic tolerance:
"
Up tp
±
10 kv: No hardware error
"
Up tp
±
15 kv: No component damage
Surge current: 1/2 cycle, 50A max.
Insulation resistance: 10 M
Ω
min.
Dielectric strength: No breakdown when the following voltages are applied for
one minute.
"
100V model: AC 1000V (Primary to chassis)
"
200V model: AC 1500V (Primary to chassis)
Leakage current:
"
100 V model, 100 V input: 0.25mA or less
"
100V model, 100 V input: 3.5mA or less
"
200V model: 3.5mmA or less
Table 1-11. Temperature and Humidity Conditions
Conditions Main Unit
Temperature Normal conditions 0 to 35 °C
Severe conditions
(1/30 of total storage
period)
High temperature 0 to 40 °C
Low temperature
-20 to 0 °C
Humidity Normal Conditions 30 to 85% RH
Severe conditions
(1/30 of total storage
period)
High humidity 85 to 95% RH
Low humidity
10 to 30% RH
Storage period 18 months from
manufacture