Service manual

EPL-5700L/5700i Revision A
PRODUCT DESCRIPTION BASIC SPECIFICATIONS 12
SOFTWARE SPECIFICATIONS
This printer is host-based, namely, the host computer (printer driver)
generates print images. Refer to the software guide for details.
ENVIRONMENTAL CONDITIONS
Temperature (including expendable parts):
Operation: 10 to 35 °C
Storage under normal conditions: 0 to 35 °C
Storage under extreme conditions: -20 to 40 °C
(1/30 of the total holding period)
Humidity (including expendable parts):
Operation: 15 to 85% without condensation
Storage under normal conditions: 30 to 85%
Storage under extreme conditions: 10 to 95%
(1/30 of the total holding period)
ELECTRICAL SPECIFICATIONS
Power Supply Voltage: 100 ± 10%
Power Supply Frequency: 50 to 60Hz ± 3Hz
Standard Maximum Current: 6.3A
Power Consumption: Maximum: 580W
Average during continuous printing:200W
Standby Mode (Heater On): 490W
Standby Mode (Heater Off): 15W
AC Line Noise: Pulse Width: 50 to 1,000ns
Pulse Polarity: ±
Repeat: Non-simultaneous
Mode: Common/Normal
Voltage: 1KV
Parts can withstand up to 2KV without damage.
Instant Cutoff: DIP 100% (for standard voltage - 10%) for one
cycle with normal print quality.
Electrostatic Durability: No hardware errors up to ± 10KV.
(No unrecoverable software errors)
Components can withstand up to ± 15KV without
damage.
Rush Current: 1/2 cycle, 50A or less
Insulation Resistance: 10M
Ω
or higher
Dielectric Strength: AC1000V is applied for one minute with no
breakdowns (duration of one surge).
Leakage Current: 0.25mA or less (100V model)