Setup guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap 1-Setting Up Your System
- Chap 2-Running the SETUP Program
- Starting the SETUP Program
- Selecting Options
- Setting the Date and Time
- Setting the Processor Speed Options
- Setting the Fast Boot Option
- Setting the System and Video BIOS Options
- Setting the Keyboard Options
- Installed Equipment
- Setting the Built-in Paralllel and Serial Port Options
- Setting the Speaker
- Setting the Disk Drive Controllers
- Setting the Password Options
- Setting the Diskette Drive Type(s)
- Setting the Hard Disk Drive(s)
- Setting the Non-cache Areas
- Setting the Cache Test and Use Control Options
- Saving Your Settings and Exiting SETUP
- Post-SETUP Procedures
- Appendix A-Using Memory
- Index
- Diagrams
You made changes, and want to save them
and exit SETUP
Press
I
You see the following menu:
Save and Exit
No Save and Exit
Return to Setup
Highlight
Save
and Exit and press
Ibcl.
The computer
saves your settings in its CMOS RAM and reboots.
To remain in the SETUP program, highlight Return
to
setup and press
m
The exit menu disappears and you see
the current SETUP screen.
You made no changes and want to exit SETUP
Press
[Ewl
You see the following menu:
Exit setup
Return to setup
To exit the program, highlight Exit
setup and press
[Enr*L
The computer continues the booting process and loads your
operating system from a diskette or your hard disk drive.
To remain in the SETUP program, highlight Return
to
Setup and press
m
The exit menu disappears and you see
the currents SETUP screen.
Running the SETUP Program
2-27